Steps Involved in The Process of Car Paint Sydney

A car is a valuable possession for any car owner and he/she puts all the possible efforts to make sure that it continues to be in a perfect condition both physically and technically. There are several steps that a person could take to keep it looking and performing flawlessly every time and one of them is painting it and for this, there are generally two options. One is spray painting on your own and the second is getting it painted by an expert team. The first step is advisable only if you are fully aware of the process as well as the complexities involved in it and just in case, you are not, continue reading this post as we have presented some important tips regarding DIY paint Sydney.

The Basic Supplies Required for Spray Painting Are:

  • Spray paint cans in the choice of color chosen
  • Spray Gun
  • Spray rust killer and primer
  • Fluorescent Paint
  • Newspaper
  • Masking Tape
  • Sanding Paper
  • Car Wash
  • Goggles

According to the experts, there are several steps involved in the process, if you are confused about how to paint your car. Some of the most important part of automotive painting lessons has been discussed here in the post.

Preparing the Car

  • In the first step, you will have to wash your car thoroughly from the exteriors with water and mild soap and allow it to dry completely.
  • At the same time, it is important that you remove all the fixtures from the interiors and for washing, painting, etc., a closed well-lit and well-ventilated garage can be used.
  • If this kind of space is not present, another option is to choose an open space in the yard where access to air and light is easy.

Sanding the Car

  • Once the vehicle has dried, the next step involves sanding the vehicle as this way, old paint and everything older would get removed.
  • This is a back-breaking task in the beginning, but once the paint gets peeled, it becomes a really easy thing to engage.
  • This can be done very easily using finer sandpaper as it will remove and kind of scratches and signs of corrosion.
  • If there are any minor gaps, they have to be filled with putty and dried before painting, leaving the entire exterior smooth.

Other Steps Involved in The Process Are –

  • Masking Off and Taping
  • Applying Primer
  • Spray Painting – First Coat
  • Adding A Second Coat